AerMet 100: forms, specifications and uses
AerMet® 100 is an ultra-high strength martensitic alloy steel.
Stainless Steel product forms offered at all Titanium Industries locations include Stainless Steel Round Bar and Stainless Steel Hex Bar.
For AerMet 100, request a quote online or contact your nearest Titanium Industries location. Alloy data on this page is for reference only, not for design.
Weight Calculator
AerMet® 100 is an ultra-high strength martensitic alloy steel. Cobalt and nickel are the main alloying elements with chromium, molybdenum and carbon also added. Its exceptional properties are hardness, tensile strength, fracture toughness and ductility. AerMet® 100 is not corrosion resistant, so it must be sealed if used in moist environments.
AerMet® is a registered trademark of CRS Holdings, Inc., a subsidiary of Carpenter Technology Corporation.
Stainless Steel product forms offered at all Titanium Industries’ locations:
- Stainless Steel Round Bar
- Stainless Steel Hex Bar
AerMet® 100 Applications:
- Fasteners
- Landing Gear
- Actuators
- Ordnance
- Jet Engine Shafts
- Drive Shafts
DISCLAIMER: Alloy data sheets are for reference only, not for design purposes.
| Chemical Composition | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| C 0.21 - 0.25% | Ni 11.0 - 12.0% | Co 13.0 - 14.0% | Cr 2.90 - 3.30% | Mo 1.1 - 1.3% | |||||
| Fe Balance | |||||||||
| PHYSICAL PROPERTIES | ||||||
|---|---|---|---|---|---|---|
| Density (lb/ft3) | Electrical conductivity (% IACS) | Thermal conductivity (BTU/h-ft-°F) | Specific heat capacity (BTU/lb-°F) | Thermal expansion (µm/m°C) | ||
| 0.285 | - | - | - | - | ||
| Mechanical Properties | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Property | Minimum | Maximum | |||||||
| Yield Strength Range (MPa) | 1620 | 1724 | |||||||
| Tensile Strength Range (MPa) | 1931 | 1965 | |||||||
| Elongation (%) | 8.0% | 14.0% | |||||||
| Hardness (HRC) | - | 53 | |||||||
| Modulus of Elasticity (GPa): - | |||||||||
| Machineability General Index: - | |||||||||
AerMet 100: questions and answers
What is AerMet 100?
What is AerMet 100?
AerMet® 100 is an ultra-high strength martensitic alloy steel.
Which stainless steel product forms does Titanium Industries offer?
Which stainless steel product forms does Titanium Industries offer?
Stainless Steel Round Bar and Stainless Steel Hex Bar, at all Titanium Industries locations.