Titanium Grade 1 CP 4: forms, specifications and uses
Titanium Grade 1 CP 4 (UNS R50250) is the first of a total of four commercially pure Titanium grades.
Titanium Industries offers Titanium Grade 1 CP 4 Round Bar from its locations.
Titanium Grade 1 CP 4 is supplied to specifications including ASTM B348 Gr 1, ASME SB-348 and EN 10204.31.
Typical uses of Titanium Grade 1 CP 4 include airframe components, chemical processing equipment, cryogenic vessels, surface condenser, heat exchangers and tubing.
For Titanium Grade 1 CP 4, request a quote online or contact your nearest Titanium Industries location. Alloy data on this page is for reference only, not for design.
Weight Calculator
Titanium Grade 1 CP 4 Round Bar | UNS# R50250
Titanium Grade 1 CP 4 | UNS# R50250 is the first of a total of four commercially pure Titanium grades. Grade 1 is the most ductile and softest of these grades and also boasts the best formability, high impact toughness, and superb corrosion resistance. Because of Grade 1's versatility, applications are wide spread. From marine environments, automotive, aerospace, and various medical uses.
Titanium Grade 1 CP 4 Round Bar Inventory Size Range:
- Min Diameter: 0.125″/3.175 mm | Max Diameter: 14.000″/400.00 mm
- Titanium Grade 1 Round Bar
Titanium Grade 1 CP 4 Round Bar Specifications:
- ASTM B348 Gr 1, ASME SB-348, EN 10204.31
Titanium products offered at all Titanium Industries locations: Titanium Plate | Titanium Sheet
Titanium Grade 1 CP 4 Applications:
- Airframe Components
- Chemical Processing Equipment
- Cryogenic Vessels
- Surface Condenser
- Heat Exchangers
- Tubing
DISCLAIMER: Alloy data sheets are for reference only, not for design purposes.
| Chemical Composition | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| C ≤ 0.08% | H ≤ 0.015% | Fe ≤ 0.2% | N ≤ 0.03% | O 0.18% | |||||
| Ti balance | |||||||||
| PHYSICAL PROPERTIES | ||||||
|---|---|---|---|---|---|---|
| Density | Electrical conductivity (% IACS) | Thermal conductivity (BTU-in/hr-ft²-°F) | Specific heat (BTU/lb-°F) | Thermal expansion (1/°F) | Thermal expansion | Melting Point (°F) |
| 0.163 | 4.11 | 111 | 0.124 | 4.78E-06 | - | 3040 |
| Mechanical Properties | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Property | Minimum | Maximum | |||||||
| Yield Strength Range (Rp0.2 Offset) (ksi) | 25 | - | |||||||
| Tensile Strength Range (Rm) (ksi) | 35 | - | |||||||
| Elongation (AL=5 x Ø) | 24.0% | 29.0% | |||||||
| Brinell Hardness (H) | - | 120 | |||||||
| Modulus of Elasticity (ksi) (E): 15200 | |||||||||
| Machineability General Index: 40% | |||||||||
Follow us on Social Media:
Titanium Grade 1 CP 4: questions and answers
What is Titanium Grade 1 CP 4?
What is Titanium Grade 1 CP 4?
Titanium Grade 1 CP 4 (UNS R50250) is the first of a total of four commercially pure Titanium grades.
Which Titanium Grade 1 CP 4 product forms does Titanium Industries stock?
Which Titanium Grade 1 CP 4 product forms does Titanium Industries stock?
Titanium Grade 1 CP 4 Round Bar.
Which specifications does Titanium Grade 1 CP 4 meet?
Which specifications does Titanium Grade 1 CP 4 meet?
ASTM B348 Gr 1, ASME SB-348 and EN 10204.31.
What is Titanium Grade 1 CP 4 used for?
What is Titanium Grade 1 CP 4 used for?
Airframe components, chemical processing equipment, cryogenic vessels, surface condenser, heat exchangers and tubing.