Skip to main content

AMS 2630 | Inspection, Ultrasonic Product Over 0.5 Inch (12.7 mm) Thick

Create QuoteContact Us

What AMS 2630 covers

AMS 2630 is the aerospace material specification for inspection, ultrasonic product over 0.5 inch (12.7 mm) thick.

Titanium Industries stocks Cobalt Chrome Grade 1537 Round Bar to AMS 2630.

For AMS 2630 material, request a quote online or contact your nearest Titanium Industries location. The information on this page is for reference only and does not replace the specification itself.

Round bar, one of the product forms Titanium Industries stocks to AMS 2630

Weight Calculator

AMS 2630

Cobalt-chrome-molybdenum (CCM) Grade: 1537 Scope: Inspection, Ultrasonic Product Over 0.5 Inch (12.7 mm) Thick Description: This specification covers procedures for ultrasonic inspection, by pulse-echo procedures, of flat, rectangular, round, cylindrical, and contoured products having a thickness or cross-sectional dimension greater than 0.5 inch (12.7 mm), using either contact or immersion methods, and using the longitudinal-wave or shear-wave modes or combinations of the two, as necessary. This specification may apply to testing finished machined parts provided the parts can meet the basic testability requirements, such as size, contour, metallurgical structure, and thickness.

Product availability:

  • Cobalt Chrome Grade 1537 Round Bar

DISCLAIMER: The use of this information should be considered strictly voluntary. Information contained in this page or across the domain, may contain typographical errors and are for reference only. Information presented are purely generalizations and are not a substitution for AMS specifications.

AMS 2630 Specification — Table 1
CHEMICAL COMPOSITION
C 0.14% Max Si 1.0% Max Mn 1.0% Max Cr 26.0  - 30.0% Mo 5.0 - 7.0%
Ni 1.0% Max Fe 0.75% Max N 0.25% Max Co Balance
AMS 2630 Specification — Table 2
Mechanical Properties
Hardness: 40 HRC Yield Strength (Mpa): 827 min Elongation: 12%

Tensile properties and associated requirements vary due to orientation, section thickness, and engineering requirements.

Typical Applications

  • Medical implants (endoprothesis and osteosynthesis)

AMS 2630: questions and answers

What does AMS 2630 cover?

AMS 2630 covers procedures for ultrasonic inspection, by pulse-echo procedures, of flat, rectangular, round, cylindrical, and contoured products having a thickness or cross-sectional dimension greater than 0.5 inch (12.7 mm), using either contact or immersion methods, and using the longitudinal-wave or shear-wave modes or combinations of the two, as necessary.

Which products does Titanium Industries stock to AMS 2630?

Cobalt Chrome Grade 1537 Round Bar.

How do I order AMS 2630 material?

Request a quote online or contact your nearest Titanium Industries location.